Hi All,
Is it possible to move the Line 1 and Line 2 appearances on the diaplay of a Polycom 330. Right now the fixed Line 1 and Line 2 buttons are one above the other starting with Line 1 above Line 2, however the display shows it in reverse Line 2 is aboe Line 1. I know I can move the fixed line buttons, by popping of the cover on the buttons, but it would look nicer is the display showed Line 1 above Line 2.
Also how is the Buddy list populated (on the phone itself or through PBX manager Provisioning)?, I would like my unused buttons to be BLF's for some extensions.
Thanks,
Chris A
BTW is it possible on 320/330
BTW is it possible on 320/330 to remove soft button DIR and replace it with a redial button
I have played around on 450 I have add DND as a soft button and I have the code for redial which works fine for 450+ but on 320/330 since there is no spare slot would remove the directory but I couldn't figure it out
Any help would be appreciated
Hi Erik, Thanks, got it. Do
Hi Erik,
Thanks, got it. Do you use an xml file to populate the directory on the Polycoms, or do you have users enter them through the phone? I found the sample file you mentioned in the provisioning folder.
Thanks,
Chris
did you make line 1 and 2 a different extension? otherwise you should just have 1 registration selecting 'all buttons' for them both to be the same extension.
they do populate in sequential order ascending. However, if you try to make both buttons register as the same extension by creating two different registrations, the second registration overrides the first. Use 1 registration and specify how many line keys to span.
likewise if you have a phone where you dont want to have buttons register, specify the extension it registers as, and how many buttons to span. the unused buttons will populate off the contact list based on contact # order. Enabling 'watch buddy' is what triggers BLF.