ATA Port setup

ok i have installed a linksys wrt54gl with siproxd and all registrations are unning nicely in siproxd_registration file however when a call is made from extension 301 im getting a fast busy with the following error
WARNING[7554] chan_sip.c: username mismatch, have <304-tenantID>, digest has <301-tenantID>
NOTICE[7554] chan_sip.c: Failed to authenticate user Anonymous ;tag=b22db7fcff9ca6eo0

i don't see any thing wrong in the ata setting (at least noting different between extensions)

could any one shed some light

thanks in advance

You should be able to use the stock firmware on the wrt54gl and have multiple spa2102 units behind it.

Change the registration time to 120 seconds and enable NAT in thirdlane.

-Matt

that ship had sailed i already installed openwrt with siproxd and it is working fine aside of the error which while looking around this seems to be a asterisk bug and not related to the ata or else

in runing on asterisk 1.4.29 did any one have experience with this bug

I would hit the asterisk-users list if you think it is an Asterisk issue.

i have a setup of 2 spa2102 total of 4 lines and 2 Polycom 450s setup behind a linksys wrt54gl running openwrt with siproxd, and incoming calls work fine just outgoing calls from 1-3 out of the spa2102 are giving me the above error line 4 and the 2 Polycom phones are working good

it doesn't look like the bug, since with bug no phone on the network is working either incoming or outgoing, and there is a work around to set type=friend which is set by default in tl

any advice

thanks

you should not alter the ports on the other ata.
did you make sure the ata's are using and registering to the siproxd application?

all are registered in the siproxd however the ATAs are registering with their ports (default ports line1 5060 line 2 5061) next to the local IP unlike the Polycom registrations wihch have no port next to it

siproxd_registration looks like this where extension 301-304 are the ATAs and 201-202 are the polycom

sip
303-TenantID
192.168.1.105
5060
sip
303-TenantID
173.xx.xx.31

sip
303-TenantID
MTE.server.com

***:1:946789978
sip
304-TenantID
192.168.1.105
5061
sip
304-TenantID
173.xx.xx.31

sip
304-TenantID
MTE.server.com

***:1:946791191
sip
301-TenantID
192.168.1.146
5060
sip
301-TenantID
173.xx.xx.31

sip
301-TenantID
MTE.server.com

***:1:946791191
sip
302-TenantID
192.168.1.146
5061
sip
302-TenantID
173.xx.xx.31

sip
302-TenantID
MTE.server.com

***:1:946787845
sip
202-TenantID
192.168.1.243

sip
202-TenantID
173.xx.xx.31

sip
202-TenantID
MTE.server.com

***:1:946787900
sip
201-TenantID
192.168.1.223

sip
201-TenantID
173.xx.xx.31

sip
201-TenantID
MTE.server.com

***:0:0

maybe i should change all the lines to port 5060

the reason line 2 is 5061 is because its the same ip, so line 1 is 5060 and line 2 is 5061. you dont have to do 5063 and 5064 on the other ATA because its a different ip registering with the sip proxy.

just keep them at 5060 and 5061 as their defaults.

also make sure you have set the userid and authuserid to the same user, and checked 'use auth id'

just changed userid and authuserid to the same user, and checked 'use auth id' and still the same outcome incomming works outgoing only line 304 which is l2 of ata 2 is working

you've got a setting wrong somewhere. obviously 301 has somethign about it that matches 304. Either you are not setting up the sip settings correctly, or you dont have the ata set up correctly.

i have reset the ATAs to default and reentered all the info with the same result, no out going calls could be made from any line but line 4 cli is giving the following error

any ideas


[Feb 11 11:07:05] WARNING[7554] chan_sip.c: username mismatch, have <304-TenantID>, digest has <301-TenantID>
[Feb 11 11:07:05] NOTICE[7554] chan_sip.c: Failed to authenticate user Anonymous ;tag=e150c58c3123120do0
[Feb 11 11:07:46] WARNING[7554] chan_sip.c: username mismatch, have <304-TenantID>, digest has <302-TenantID>
[Feb 11 11:07:46] NOTICE[7554] chan_sip.c: Failed to authenticate user Anonymous ;tag=c0d36a469f8d3491o1
[Feb 11 11:08:15] WARNING[7554] chan_sip.c: username mismatch, have <304-TenantID>, digest has <303-TenantID>
[Feb 11 11:08:15] NOTICE[7554] chan_sip.c: Failed to authenticate user Anonymous ;tag=8950fbbdf086f5do0


i have upgraded to 5.2.5 and now it works good

what were you running before?

the default version not sure the exact number but it is in the 3.3.? range,

i found on a blog that someone had a similar issue but with incoming only and the upgrade helped i figured i will give it a shot and it worked

thanks for the help

it just started again with the mismatch noting was changed in the settings and no body touched the ATAs

what could it be ?

I cannot figure out the issue,however it is very interesting when I reset the ata to factory default and re enter all the account info it works fine I can't reproduce the issue

It just happened again after a power outage when the power came back on (not sure if it is related just stating the fact) incoming are working on all the lines, outgoing the polycoms ware working fine line 4 (which is line 2 of ata 2) was working the 3 other lines on the ata's outgoing aren't going trough comming back mismatch, I did the quick fix pressed #### 73738# and re entered the extension info in the ata's and it is back up, (nerve racking especially when you need to do it manually auto provisioning isn't working for spa2102)

What could be the cause, or best work around to avoid this issue,

Thanks

It seems like this something not going away

It works for a few days some times weeks and out of the blue it gets mismatched

What could be the issue