SIP Notify questions

I modified my sip_notify.conf file to include

[sipura-get-cfg]
Event=>report
Content-length=>0

I then enter

sip notify sipura-get-cfg 2001-myExtension

in the cli and regular cmd line for asterisk both dont work.

Any suggestions?

it should still be the resync command

sipura-check-cfg will work IF you have

<Resync_From_SIP> yes </Resync_From_SIP>

you can also find this setting in the gui.

yes its says yes but still doesnt write out to a file on my http server

any other ideas?

http is a read-only provisioning solution
why are you trying to upload a config?

i dont want to upload, the provisoning rule does that.

I want to get the current config file from the linksys to a Config.cfg file on my server for backup reasons.

I was told this is done through the report rule in the gui.

I could have it to go to a ftp server but that didnt work either.

that's what we call, in the real world, uploading.

you want to upload a file from the phone to the server. HTTP provisioning does not support this.

so what would you suggest in order to get that config file?

it has the ftp ability, correct?

do you have an ftp server running?

yes

do you know if the spa942's even support FTP? they might just be TFTP .. and if you dont know how to upload with tftp (ie how to run the server side, how to name the files, how to set the file permissions and who has to own them) you're going to have to do quite a bit of reading. Its the same reading in order to upload cisco router configs to a tftp server.

Does anyone have spa8000.cfg and willing to share?

Thanks,

Reeza

i believe the structure is identical the SPA2102 just more lines to loop through.

have you read through this guide?

https://www.myciscocommunity.com/docs/DOC-3216