cisco SPA504G Reboots

its a connundrum .. in order to make sure there wasnt any left-over crap we first wipe out every setting, then we set each line key to the correct setting. Otherwise these damn phones dont flush their settings, they merge them with the new config creating a whole jumbled mess..

in the top of your template you'll see a bunch of line_enabled set to NO. if you comment that out you'll avoid a poorly written daily reboot by the phones. However, you will gain a tremendous amount of frustration whenever you attempt to change the settings of phones and their assignments.

Thanks for the help
Do you happen to know if it is possible to set a timed reboot for say midnight?
Thank you

i couldnt find it on those low end devices. polycom, naturally, has its set at 3am to check for new changes. have you considered a new line of phone going forward? for the same price you can use those digium D40's and they seem to be much higher quality.

Try setting this in your provisioning scripts: Resync_Periodic 864000
Its default on 86400 (1 day)

That would set it for 10days for a reboot.
That would be better but still not the best. Cisco says they can do a scheduled time but I have not gotten the answer back from them yet with better details.
They say to add
To schedule a resync at a certain time, the parameter is 'Resync At', located in Provisioning
but I am not sure how.

2132

from here
https://supportforums.cisco.com/docs/DOC-14899

i just googled 'spa resync at'

You Rock and I feel so slow.
Thank you it works very well now. Tested it for 3 days.
The phone does not reboot at the exact time because of other setting but it is close and is way better than work hours.
Aaron