Really lost here.
I got the tdm400p working but I am not sure how to specify the
groups for calling in and calling out via the analog pots lines.
I am trying to replace my analog phone system with thirdlane.
Any Ideas?
This is what mine looks like for the TDM800P
It took some doing but this is how I got mine to work. Here are the 3 Conf files I used.
Zapata-Channels Conf
Span 1: WCTDM/0 "Wildcard TDM800P Board 1"
;;; line="1 WCTDM/0/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
context=default
;;; line="2 WCTDM/0/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
context=default
;;; line="5 WCTDM/0/4 FXOKS"
signalling=fxo_ks
callerid="Channel 5" <6005>
mailbox=6005
group=5
context=from-internal
channel => 5
callerid=
mailbox=
group=
context=default
;;; line="6 WCTDM/0/5 FXOKS"
signalling=fxo_ks
callerid="Channel 6" <6006>
mailbox=6006
group=5
context=from-internal
channel => 6
callerid=
mailbox=
group=
context=default
Zapata Conf
Span 1: WCTDM/0 "Wildcard TDM800P Board 1"
;;; line="1 WCTDM/0/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-outside
channel => 1
context=default
;;; line="2 WCTDM/0/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-outside
channel => 2
context=default
;;; line="5 WCTDM/0/4 FXOKS"
signalling=fxo_ks
callerid="Channel 5" <6005>
mailbox=6005
group=5
context=from-inside
channel => 5
callerid=
mailbox=
group=
context=default
;;; line="6 WCTDM/0/5 FXOKS"
signalling=fxo_ks
callerid="Channel 6" <6006>
mailbox=6006
group=5
context=from-inside
channel => 6
callerid=
mailbox=
group=
context=default
Zaptel Conf
# Span 1: WCTDM/0 "Wildcard TDM800P Board 1"
fxsks=1
fxsks=2
# channel 3, WCTDM, no module.
# channel 4, WCTDM, no module.
fxoks=5
fxoks=6
# channel 7, WCTDM, no module.
# channel 8, WCTDM, no module.
# Global data
loadzone = us
defaultzone = us
well your context= in zapata.conf is from-outside
and if you specified group=1 then when you create a zap trunk use G1 as the name